Model | CCT-8320 | ||
Signal detection (serven channels) |
Dry contact input |
Raw water tank level: double channels |
Low level |
High level | |||
Pure water tank level: double channels |
Low level | ||
High level | |||
Low pressure protection | |||
High pressure protection | |||
Pretreatment backwash signal | |||
Control port (five channels) |
Dry contact output | Raw water pump |
SPST-NO: Load capacity; AC 220V/3A Max; AC 110V/5A Max; DC 24V/3A Max |
lnlet valve | |||
High pressure pump | |||
Flush valve | |||
Conductivity voerlimit drainge value | |||
Measure detection points | Raw water condudctivity, product water conductivity, raw water Temp. | ||
Measurement range | Raw water confutivity | Measurement range | 5~4000μS /cm |
Conductivity Cell constant | 1.0cm-1 | ||
Product water conductivity | Measurement range | 2~200μS /cm | |
COnductivity Cell constant | 1.0cm-1 | ||
Medium Temp. | 0~50℃ | ||
Accuracy | 1.5% (FS) | ||
Communication | RS485 communication (Modbus protocol) | ||
Work Environment | Temp: 0~50℃, relative humidity: ≤85%RH (none condensation) | ||
Storage Environment | Temp: -20~60℃, relative humidity: ≤85%RH (none condensation) | ||
Power supply | DC24V±4 V | ||
Protection level | IP65 (with back cover) | ||
Dimensions | 130mm×180mm×60mm (H×W×D) | ||
Hole size | 122mm×172mm (H×W) | ||
Installation | Panel mounted, fast installation |