| Model | CCT-9300 | |||
|
Signal detection (eleven channels) |
Dry contact input |
Raw water level: double channels |
Low level | |
| High level | ||||
|
Intermediate tank level: double channels |
Low level | |||
| High level | ||||
| Fist stage low pressure protection | ||||
| First stage high pressure protection | ||||
| Second stage high pressure protection | ||||
|
Pure water tank level: double channels |
Low level | |||
| High level | ||||
| Pretreatment backwash signal | ||||
|
Control port (seven channels) |
Dry contact output | Raw water pump |
SPST-NO Load capacity: AC 220V/3A Max; AC 110V/5A Max; DC 24V/3A Max |
|
| External control mode signal | ||||
| lnlet valve | ||||
| First stage booster pump | ||||
| First stage flushing valve | ||||
| First stage over-limit drainage valve | ||||
| Second stage booster pump | ||||
| Second stage over-limit drainage valve | ||||
| Conductivity measurement points | Raw water conductivity, First stage product water, Second stage product water, raw water temp | |||
| Raw water conducctivity | Measurement range: 0.05～19.99mS/cm | |||
| Conductivity Cell constant: 10.0cm–¹ | ||||
| Measurement range: 5～1999μS /cm | ||||
| Conductivity Cell constant: 1.0cm–¹ | ||||
| First stage product water | Measurement range: 2～199.9μS /cm | |||
| Conductivity Cell constant: 1.0cm–¹ | ||||
| Second stage product water | Measurement range: 0.5～19.99μS /cm | |||
| Conductivity Cell constant: 1.0cm–¹ | ||||
| Medium Temp. | 0～60℃ | |||
| Accuracy | 1.5%(FS) | |||
| (4～20)mA output | Channels: Single channel | |||
| Characteristics: Isolated，reversible、fully adjustable，instrument / transmitter for selection. Programmable for raw water conductivity, fist stage product water conductivity, second stage product water conductivity. | ||||
| Loop resistance: 300Ω(max), DC24V | ||||
| Accuracy: ±0.1mA | ||||
| Work Environment | Temp: 0～50℃, relative humidity: ≤85%RH (none condensation) | |||
| Storage Environment | Temp: -20~60℃, relative humidity: ≤85%RH (none condensation) | |||
| Power supply | DC24V±4 V | |||
| Dimensions | 130mm×180mm×60mm（H×W×D） | |||
| Hole size | 122mm×172mm（H×W） | |||
| Installation | Panel mounted, fast installation | |||